1010music Synthbox 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} 1010music Synthbox에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 1010music Synthbox 2 페이지.
1010music Synthbox에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

Configure the Wavetables and Oscillator

Push the HOME button until you are back to the Main screen.

On the Touch Screen, touch the element you want to control to display the Parameters

screen for that element. Touch the top waveform for Wavetable 1, the bottom waveform for

Wavetable 2, or the

Adjust a parameter by turning the Control Knob next to it.

The parameters that can be modulated have three black boxes under the parameter

setting, allowing you to configure three different sources to modulate that parameter. For

example, in the screenshot on the right,

and

LFO1

EXT1

Apply Effects

Push the HOME button until you are back to the Main screen.

Touch the name of the effect you want to control to display the Parameters screen for that

element:

for a filter,

FILT

Adjust a parameter by turning the Control Knob next to it. Note that some effects

parameters also have three black boxes under them that allow you to configure modulation

of the parameter.

Apply ENV and LFO Modulation

Synthbox allows you to modulate the waveforms, oscillator and effects via envelopes, low frequency oscillators, sequencers, and

control voltage inputs. The method of applying modulation to each of these elements is the same, so we will use a wavetable as

an example.

From the Main screen, touch the element you want to modulate (e.g. Wavetable 1) to

display the Parameters screen for that element.

Touch a black box under a parameter (e.g. the

the Modulation Selection screen.

Use the Control Knobs to adjust the modulation

choose

and

LFO1

Push the HOME button twice to go back to the Main screen.

From the Main screen, touch

Control Knobs to adjust the

page 2 of the

LFO1

Note:

You can use these same steps to apply

•

modulation is always applied to the voltage control amplifier for the voice. You can edit the

ENV1

•

parameters the same way as you edit the

To Use CV Modulation:

Plug a CV Modulator into the rightmost column of the bottom row of CV Input Jacks.

From the Main screen, touch the top waveform to display the Wavetable Parameters screen.

Touch a black box under the

jack will now control the modulation of the

EXT3

Learn More

Learn about more features of synthbox such as Sequencer Modulation by downloading the Synthbox User Manual or watching

Synthbox Videos on our website at http://1010music.com/support-2.

Join the conversation with other synthbox owners at https://forum.1010music.com.

10/24/17 1:26 PM

OSC

button just below the waveforms on the left for the Oscillator.

LFO2

are modulating

. We'll discuss modulators later.

WPos

for flanger and distortion and

FLDS

for audible results.

50%

to display the Parameters screen for

LFO1

parameters as desired. Push the INFO button to see

LFO1

parameters screen. Push the INFO button again to go back to page 1.

parameter to add a modulator. Choose

Pitch

Digital Heart – Analog Soul

is configured as a modulator for

for delay.

DLY

WPos

parameter for a wavetable) to display

and

. To start with,

Source

Amount

LFO1

and

modulation.

ENV2

LFO2

LFO

and

ENV2

parameters.

parameter.

Pitch

Wavetable Parameters

Pitch

, and

FILT Parameters Screen

. Use the

Modulation Selection

for the

. The CV Input in the

EXT3

Source

Screen

ENV1