ambiance OUTLANDER 15 Manuale di avvio rapido - Pagina 7

Sfoglia online o scarica il pdf Manuale di avvio rapido per Stufa a legna ambiance OUTLANDER 15. ambiance OUTLANDER 15 7.

MODEL: OUTLANDER 15

Optional Blower Kit Installation

Provisions have been made on this appliance to install an optional blower kit (EPT70) that comes complete with a variable speed

switch to turn blower ON/OFF, as well as to adjust the blower speed.

1. Ensure the thermal disc bracket is in

the correct postion (Fig. 1).

2. Remove the knock-out from the back

of the appliance.

3. Install the blower and housing as

shown (Fig. 2) using 4 screws (sup-

plied).

4. Loosen the adjustment screws.

5. Reach between the outer panel and

the fi rebox, then slide the thermal disc bracket until the thermal disc is touching the rear of the fi rebox. (Fig. 1).

note:

For optimal perfomance, the thermal disc MUST make contact with the fi rebox.

6. Re-secure the adjustement screws to hold the thermal disc bracket in place.

Ambiance® Fireplaces & Grills

EPT70

SCREWS

THERMAL DISC

BRACKET

www.ambiancefi replaces.com

OUTLANDER

WOOD COLLECTION

2100 PEDESTAL

MODEL ILLUSTRATED