ambiance OUTLANDER 15 빠른 시작 매뉴얼 - 페이지 7
{카테고리_이름} ambiance OUTLANDER 15에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ambiance OUTLANDER 15 7 페이지.
페이지 인쇄MODEL: OUTLANDER 15
Optional Blower Kit Installation
Provisions have been made on this appliance to install an optional blower kit (EPT70) that comes complete with a variable speed
switch to turn blower ON/OFF, as well as to adjust the blower speed.
1. Ensure the thermal disc bracket is in
the correct postion (Fig. 1).
2. Remove the knock-out from the back
of the appliance.
3. Install the blower and housing as
shown (Fig. 2) using 4 screws (sup-
plied).
4. Loosen the adjustment screws.
5. Reach between the outer panel and
the fi rebox, then slide the thermal disc bracket until the thermal disc is touching the rear of the fi rebox. (Fig. 1).
note:
For optimal perfomance, the thermal disc MUST make contact with the fi rebox.
6. Re-secure the adjustement screws to hold the thermal disc bracket in place.
Ambiance® Fireplaces & Grills
EPT70
SCREWS
THERMAL DISC
BRACKET
www.ambiancefi replaces.com
OUTLANDER
WOOD COLLECTION
2100 PEDESTAL
MODEL ILLUSTRATED