- ページ 7

ガスヒーター Ambirad TORNADOのPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。Ambirad TORNADO 16 ページ。 Gas fired mobile heater
Ambirad TORNADO にも：取扱説明書 (8 ページ)

ページを印刷する

Ducted Options.

6.1 Ducted flue gasses

The products of combustion can be taken away

from the room where the product is being used by

the use of a flue duct.

To keep touch and floor temperatures to an

acceptable level, Ambi-Rad recommend a twin

wall flue pipe with a 108mm diameter capable of

withstanding 175°C. A total length of 10m must be

used.

Ambi-Rad can supply the 5m ducted flue kit by

quoting part no. 200584. A 5m extension kit is

also available by quoting part no. 200601.

Care must also be also taken by the user to

ensure that any potentially combustible materials

do not come into contact with the flue pipe.

A flue pipe connection is available from Ambi-Rad

to connect to the flue pipe on request.

Firstly, attach the front flue pipe section to the

product by pushing the flue duct spigot into the

flue outlet to ensure that the spring loaded flap

moves through 90° to close off the flue outlet to

the axial fan air stream.

Secondly, attach the rear flue pipe section at the

end of the front section as shown above. The

securing clip can now be tightened to keep both

sections together.

6.2 Ducted air

IMPORTANT In environments where

dust, moisture or fumes are present a

ducted air inlet is provided to allow

fresh air to be drawn into the burner to aid

combustion and prevent obstruction of the

burner with foreign objects. The tube feeding

the ducted air inlet must be 150mm diameter

and have a maximum length of 10 metres.

Ambi-Rad can supply a 5m ducted air spigot kit by

quoting part no 201847.

To fit the ducted air tube assembly push the

ducted air spigot into the connection point on the

side of the product as shown in the above photo.

6.3 Air delivery duct

A 450mm air delivery duct can be fitted to the

outlet spinning as shown using a suitable fixing

method. A material capable of withstanding 120°C

must be used.

Ambi-Rad can supply a 10m air delivery duct by

quoting part no 201848.

For Full installation details, please refer to

separate doc ref GB/TOR/175/1107.