- ページ 6

コントローラー AMCOL 3500-ETCのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AMCOL 3500-ETC 12 ページ。 Electronic timing controller
AMCOL 3500-ETC にも：技術説明 (8 ページ)

7. Optionally, replace the "on" button (PB1) of a Donaldson Torit VS-550 dust

collector with a cable connection to output 02 on the PLC.

8. Connect control signal wire from PLC or machine to ETC at input 0

through open cable gland. A terminal for a common connection is also

available if necessary. See wiring diagram for details.

9. Ensure the 3500E system is installed correctly and is ready to operate.

10. Operate the ETC manually, observing that the ETC and 3500E system

function correctly together. Note that holding the manual button will

cycle the system as long as it is held.

11. Adjust system settings where necessary.

12. Under careful observation, operate system in production environment.

3500-ETC Operator's Manual

P a g e | 5