AMCOL 3500-ETC Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Kontroler AMCOL 3500-ETC. AMCOL 3500-ETC 12 stron. Electronic timing controller
Również dla AMCOL 3500-ETC: Opis techniczny (8 strony)
Drukuj stronę7. Optionally, replace the "on" button (PB1) of a Donaldson Torit VS-550 dust
collector with a cable connection to output 02 on the PLC.
8. Connect control signal wire from PLC or machine to ETC at input 0
through open cable gland. A terminal for a common connection is also
available if necessary. See wiring diagram for details.
9. Ensure the 3500E system is installed correctly and is ready to operate.
10. Operate the ETC manually, observing that the ETC and 3500E system
function correctly together. Note that holding the manual button will
cycle the system as long as it is held.
11. Adjust system settings where necessary.
12. Under careful observation, operate system in production environment.
3500-ETC Operator's Manual
P a g e | 5