- ページ 2

産業機器 AME Intl. 11001のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AME Intl. 11001 6 ページ。 Aluminum otr 5 piece bead

ページを印刷する

! WARNING !

To avoid serious

personal injury, always

wear proper protective

gear, such as hard hats,

safety glasses, gloves,

and steel toe shoes

when using hydraulic

equipment. Always

stand to one side of the

rim when using the bead

breaker. Standing to

one side of the bead

breaker allows you to

maintain control of the

bead breaker. If it is not

seated properly and flies

off the rim, the bead

breaker could cause

serious injury or death.

AME INTERNATIONAL

INSTRUCTION MANUAL

IMPORTANT RECEIVING INFORMATION

Visually inspect all parts for shipping damage. If you find shipping dam-

age, notify the carrier at once. Shipping damage is not covered by your

warranty. The carrier is responsible for all costs of replacement or repair

caused by shipping damage.

DESCRIPTION

These bead breakers are used on 25" – 51" multi-piece rims with pry bar

pockets. They are designed to break earthmover tire beads on any rim.

They can be used with models 15900, 15920, 15940 or equivalent 10,000

psi [700 bar] pumps.

SAFETY INFORMATION

To avoid personal injury or property damage while using this product, read

and follow all DANGERS, WARNINGS, CAUTIONS, and INSTRUTIONS

that are attached to, or included with, this product. Follow the instruc-

tions of the tire manufacturer and the vehicle manufacturer when de-

flating, demounting, mounting, and inflating tires. These operating

instructions do not apply to any specific rim. Therefore, contact the

rim manufacturer for the correct procedure for your rim. For the pub-

lication, "Multipiece Rim Matching Chart" contact the United States

Department of Labor Occupational Safety and Health Administration

(OSHA), Washington, DC,20210, 202-219-6091 or contact AME Intl. at

877-755-4263. If you are outside the U.S., contact your local govern-

ment officials. AME Intl. cannot be held responsible for damage or

injury resulting from unsafe use of this product, lack of maintenance,

or incorrect product and system application. Contact AME Intl. when

in doubt about safety precautions or applications.

The bead breaker, and all the tire tools, should be used only by persons prop-

erty trained according to OSHA Regulation #29CFR19010.177, "Servicing Sin-

gle-Piece & Multi-Piece Wheels." Free copies of this regulation are available

upon reguest from AME Intl.

- 2 -

CAUTION