- ページ 3

室内装飾品 Coalesse Train seriesのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Coalesse Train series 8 ページ。 Modular table power system train tables

ページを印刷する
Coalesse Train series 取付説明書

Attach Base To Table Top

1.
Carefully place table top upside
down onto carpet or other soft, clean
surface. Lower base assembly into
place onto the table top. The leg
attachment brackets should fit
into the pockets routed into the
underside of the table top.
2.
Attach the leg attachment
brackets to the table top using
(3) #A730461 screws in each
bracket. The 4th hole in the leg
attachment brackets will be
covered by the leg castings while
the table is upside down.
3.
Carefully set the table right side
up, then drop top into vertical position.
This will give access to install the
4th screw in each bracket.
1
SWING ARM
3
To drop table top into vertical position:
A) disengage plastic sliders (both sides)
B) rotate each swing arm toward the base
C) rotate top into vertical position
1
TIP: Place a shim under carpet
to allow a finger hold when
assembled unit is ready to upright.
2
Install (3) screws
through each
bracket at this time.
ROUT
Page 3 of 8
939505524 Rev D