- ページ 5
室内装飾品 Coalesse Train seriesのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。Coalesse Train series 8 ページ。 Modular table power system train tables
ページを印刷する
Modular Table Power System Installation
Risk of Fire or Electric Shock
1. For use in indoor, dry locations only.
2. Read and install in accordance with all assembly directions.
3. Only connect to products labeled "Modular Table Power System" by Steelcase.
4. Do not modify or strain cables. If damaged, remove from service immediately.
5. Disconnect modular electrical connections before servicing or reconfiguring tables.
6. Tables must be held together with ganging hardware as described in this document,
and NOT held together solely by electrical components.
7. Cable clamps must be no more than 12" from modular cable end connector or receptacle.
Ganging Hardware
Electrical components MUST be
accompanied by ganging hardware.
Table-to-Table: Tables must be
held together with table connection
hardware, shown in illustration at right,
NOT by electrical components.
Electrical Circuits
The modular table power kit is a 20 Amp, 4-wire, 2-circuit system. The 20 Amp plug infeed
allows up to 13 circuit-1 duplex receptacles. The hardwire infeed allows up to 13 duplex
receptacles per circuit for a total of 26. The duplex receptacle(s) in the table power kit and
every two simplex receptacles from the desktop module count against the 13 duplex
receptacles allowed for each circuit. Receptacle faces on the Modular Table Power Kits are
marked I, for circuit 1 and II, for circuit 2.
Risk of Fire or Electric Shock
Note: All electrical installations must be reviewed with the local authority for
compliance with local code, and must be performed by a qualified person in
accordance with codes and regulations applicable at the installation site.
WARNING
SPIKE
WARNING
12"
MAX.
SLOT
A coupling device is built into
every Train Table to enable tables
to gang together end-to-end
without tools or separate parts.
Neutral
Ground
Hot 2
Hot 1
White, 12 GA
Green or no coating, 12 GA
Red, 12 GA
Black, 12 GA
Circuit 1
Circuit 2
939505524 Rev D
CABLE
LENGTH
12"
MAX.
Page 5 of 8