- ページ 8

ボート Coastal M-CBX9.6 2016のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Coastal M-CBX9.6 2016 16 ページ。

Install the

stringers onto

each side of the

floor. Each side

should have a

long stringer

(unless you are

assembling a

larger boat).

They need to be

installed so that

they overlap the

joints of the

aluminum floor

pieces. The only purpose of the stringers is to cover the joints

of the aluminum panels. This is what will provide stability of

the floor. This is tricky because it is a tight fit. It may help to

have another person pulling up on the tubes using the straps

that hold the seat.



Install the aluminum seats into the seat straps.



Inflate the three tubes to 100%. It is normal to hear escaping

from the valve adapter when filling the boat. Continue to

pump air into the tubes until the tubes are hard.



Inflate the keel to 100%



Install the oars.



GO BOATING!!!

What is 100% full & don't have a gauge? Inflate the tubes until the hand

pump becomes somewhat difficult to push down.