Coastal M-CBX9.6 2016 Panduan Pemilik - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Perahu Coastal M-CBX9.6 2016. Coastal M-CBX9.6 2016 16 halaman.

Install the
stringers onto
each side of the
floor. Each side
should have a
long stringer
(unless you are
assembling a
larger boat).
They need to be
installed so that
they overlap the
joints of the
aluminum floor
pieces. The only purpose of the stringers is to cover the joints
of the aluminum panels. This is what will provide stability of
the floor. This is tricky because it is a tight fit. It may help to
have another person pulling up on the tubes using the straps
that hold the seat.
Install the aluminum seats into the seat straps.
Inflate the three tubes to 100%. It is normal to hear escaping
from the valve adapter when filling the boat. Continue to
pump air into the tubes until the tubes are hard.
Inflate the keel to 100%
Install the oars.
GO BOATING!!!
What is 100% full & don't have a gauge? Inflate the tubes until the hand
pump becomes somewhat difficult to push down.
8