Coastal M-CBX9.6 2016 Panduan Pemilik - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Perahu Coastal M-CBX9.6 2016. Coastal M-CBX9.6 2016 16 halaman.



Check the inflatable Keel. If it looks out of shape or won't lie

straight, it is because it has been pressed under the weight from

being in the box during shipping. Inflate the keel. It will regain its

shape when inflated. Then deflated it and it should look straight and

should line up with the floor much better!



Inflate the boat to about 50% or until it is extremely "baggy" and

only barely has its shape.



WILL

help if you put something under

the transom to lift the rear of the boat off

the ground by a few inches. The idea is to

get the floor off the hard surface the boat is

on in order to give the bottom of the boat

some "give" which will help to snap the

stringers in place. You can use the oars as

shown in the photo. Anything will work in order to get the bottom of

the boat off the hard floor.

Install wood piece number "1" into

the nose of the boat first (numbers

up on all sections).

You also need to make sure the edges of the aluminum panels are

all lined up. This is necessary to make the installation of the

stringers much easier.

Install rear aluminum panel, make

sure it fits under the height board

located on the transom