Coastal M-CBX9.6 2016 Panduan Pemilik - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Perahu Coastal M-CBX9.6 2016. Coastal M-CBX9.6 2016 16 halaman.

ASSEMBLY FOR RIGID INFLATABLE BOATS (RIB)



Find flat surface where boat will be assembled.



Never drag boat on pavement or concrete!



Remove any sharp objects from the area where boat will be

assembled and inflated.



Connect the pump to the valve by inserting the adapter attached to

the pump hose into the valve, turning it until it tightens. Do not

force it; simply turn it until it locks into place.



Inflate the three tubes (Bow, Starboard & Port) to about 50%. If the

air rushes out when you detach the adapter from the valve, you need

to turn the pushpin in the center of the valve (see above).



Install the aluminum seats into the seat straps.



Inflate the three tubes to 100%. It is normal to hear escaping from

the valve adapter when filling the boat. Continue to pump air into

the tubes until the tubes are hard.



Install the oars.



Install the plug.



GO BOATING!!!

What is 100% full & don't have a gauge? Inflate the tubes & floor until the

hand pump becomes somewhat difficult to push down.

ASSEMBLY FOR BOATS WITH ALUMINUM DECK



Assemble the deck floor outside the boat first to get the concept of

how the floor is assembled. Different size boats will have a different

number of aluminum panels. The #1 panel is made of wood, the

other panels are aluminum.

or concrete!

Never drag boat on pavement