- ページ 3

ハンダ付けガン Aktakom ASE-1115のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Aktakom ASE-1115 8 ページ。

3. Operating Instruction

3.1 Place the soldering iron in the holder separately. Then

connect the plug to the receptacle on the station and turn

clockwise to tighten the plug nut. Check that the power supply

is corresponding to the specification on the type plate and the

power switch is on the "OFF" position. Connect the control

unit to the power supply and switch on the power. Then a

self-test is carried out in which all display elements are

switched on briefly. The electronic system then switches on

automatically to the set temperature and displays this value.

3.2 The display and temperature setting

The digital display:

① shows the actual temperature of the soldering tip .

②shows the setting temperature. Pressing the "UP" or

"DOWN" button can switch the digital display to the set point

display. The set-point can be changed for ±1℃ by tapping the

"UP" or "DOWN" button. Pressing the button will change the

set-point quickly. The digital display will return automatically

to the actual value and the iron will reach to the setting

200℃, 300℃, 400℃ button. There is ℃,℉convert button.

temperature quickly. Can control the temperature through

③℃/℉ display: Switching the temperature display from ℃

to ℉ by pressing the "℃/℉"button and then the electronic