- ページ 4

ハンダ付けガン Aktakom ASE-1115のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Aktakom ASE-1115 8 ページ。

temperature② in ℉, and vice versa.

system will display the actual temperature① and setting

④When the actual temperature on the soldering tip is less

than the set-point, "HEAT ON" will display and make the

soldering tip heating up.

⑤When the absolute offset is more than ±10℃ between the

actual temperature and the set-point on the soldering tip or

the nozzle, "WAIT" will display. It means that the temperature

electronic control system is not in the stable situation, we

should wait a moment to let the "WAIT" disappear.

⑥When "ERROR" display, there may be a trouble on the

system, or the soldering iron is not connected to the control

system correctly.

3.3 Suspend Mode

The soldering station integrates automatic suspend function.

The station will go into suspend status if the soldering iron is

not operated in 15 minutes. The temperature of the soldering

tip will cool down to 200℃ and keep it during the suspend

mode until the station is restarted. And the station will be

back to the previous working condition after restarted.

You can use the below methods to restart the soldering

station:

• Power off the power switch, then power on it again.

• Push any key (If you do not pick up the soldering iron in

two minutes after pushing any key, the station will go

into suspend status again).

• Pick up the soldering iron.