- ページ 38

デジタルカメラ Canon AE-1のPDF インストール手順マニュアルをオンラインで閲覧またはダウンロードできます。Canon AE-1 48 ページ。
Canon AE-1 にも：はじめに (2 ページ), 取扱説明書 (22 ページ), マニュアル (42 ページ), マニュアル (12 ページ), 取扱説明書 (22 ページ)

ページを印刷する

1. Installation Procedure

5) Remove the stepped screw [l] used to join the fin-

isher to the host machine.

6) Remove the screw [I], and detach the small cover

[2] at the upper rear of the finisher; then, remove the

stepped screw [3], and disconnect the finisher from

the host machine at the rear. Then cut off the face

cover [4] using a nipper.

8) In the case of a Saddle Finisher-AE2, remove the

three screws [I], and detach the lower front exten-

sion cover [2] and the front foot cover [3]. Remove

the screw [4], and detach the rear foot cover [5]. Re-

move the screw [6], and detach the caster cover [7].

9) Remove the four screws [ l ]

and detach the fixing

plate (front) [2] and the other fixing plate (rear) 131.

If the fixing plate [2] cannot be removed because

the blanking part on the host machine's left cover is

small, remove the following parts:

Host machine's front cover (one blanking rubber

and two screws)

Host machine's left cover (four screws)

Next, remove the fixing plate [2].

Attach the removed cover in place after completion

of step 10.

7) In the case of a Saddle Finisher-AE2, close the front

cover. In the case of a Finisher-AEl, mount the

front cover using three screws.