- ページ 47

デジタルカメラ Canon AE-1のPDF インストール手順マニュアルをオンラインで閲覧またはダウンロードできます。Canon AE-1 48 ページ。
Canon AE-1 にも：はじめに (2 ページ), 取扱説明書 (22 ページ), マニュアル (42 ページ), マニュアル (12 ページ), 取扱説明書 (22 ページ)

ページを印刷する

1. Installation Procedure

4.2.2

Installation after Checks/

Adjustments

<Finisher-AE 1 >

1) If you have removed the auxiliary ring, mount the

rear left foot cover, and adjust the auxiliary rail to

suit the needs of the user, and fix it in place using

four screws.

2) Mount the front cover to the finisher using three

screws.

3) Mount the lower front extension cover [ l ] using a

screw [2] (RS tightening; M3 x 8). Mount the front

foot cover [3] using a screw [4] (RS tightening; M3

x 8).

4) Connect the finisher and the host machine using an

interface cable [I].

1) Remove the punch lower front cover and the punch

rear cover (three screws), and remove the stepped

screw at the front and the rear; then, detach the

puncher unit and the host machine.

2) Open the front cover.

3) Mount the front foot cover [l] using a screw [2] (RS

tightening; M3 x 8).

4) Mount the lower front extension cover [3] using a

screw [4] (RS tightening: M3 x 8) and another

screw [5] (self-tapping; M4 x 12).

5) Close the front cover.

6) Mount the caster cover [6] using a screw [7] (RS

tightening: M3 x 8).

7) Mount the rear foot cover [8] using a screw [9]

(self-tapping; M4 x 12).