- ページ 6

デジタルカメラ Canon XA10のPDF スタディ・マニュアルをオンラインで閲覧またはダウンロードできます。Canon XA10 12 ページ。 Canon xa10 hd camcorder
Canon XA10 にも：パンフレット＆スペック (2 ページ), ユーザーマニュアル (2 ページ), パンフレット＆スペック (2 ページ), クイックマニュアル (2 ページ), 基本設定 (4 ページ)

ページを印刷する

UHM Media Lab

2350 DOLE ST. KHET Studio B

WEB SITE: http://www.communications.hawaii.edu/mlab/about.htm

ATTENUATE: To reduce the signal strength or level by a large degree. The ATT switch

position reduces the audio signal strength when the sound is excessively loud and distorted.

However, it is not enough to compensate for a line level signal.

PHANTOM POWER: Electrical power (+48v) provided to the microphone from the camera

through the audio cable.

NOTE: Supplying phantom power to dynamic microphones may damage the microphone. Thus, it is

important to determine whether or not the mic needs phantom power. Before connecting a mic make sure

that the +48V switch is set to OFF. If your audio display and headset do not reveal audio signal, then turn

the +48V to ON. Don't forget to turn the phantom power OFF when not in use.

4. After setting the switches, turn the camera on and use the

thumbwheels to adjust the recording levels for the audio. Have

someone speak into the microphones and set the recording levels to

peak around -10dB. Adjust the audio separately for Ch1 and Ch2.

MANUAL VERSUS AUTOMATIC MODE

On the opposite side of the camcorder is a switch that enables you

to choose AUTO, "M" (Manual), or CINEMA. You may choose to

use "AUTO" for your shooting, but you must also understand how

to manually set White Balance, Gain, and Exposure to have

complete control when necessary. (For information on using the

"CINEMA" mode, please consult the Canon Instruction Manual.) Set the switch to "M" for

manual control.

LCD SCREEN: FUNCTION AND MENU

This is the on-screen display for the camcorder in the manual mode. If it isn't showing, push the

DISP. Button on the side of the camera. Explain the function of each of the icons and settings

on the screen:

1. Button to touch to go to the FUNC menu

2. Aperture setting

3. Shutter speed setting

4. Gain setting

5. Focus setting

6. Face detection setting

7. White balance setting

8. Audio levels indicator

9. Button to take a digital snapshot

10. Camera mode and number of scenes recorded; Changes to time in the recording mode to

indicate how long the recording has been going.

11. Pause/Record indicator – Changes to a red dot when recording video

12. Image Stabilization setting

13. Estimated charge left on battery and approximate of amount of recording time left

14. Memory slot(s) selected and how much recording time remains

15. Video quality setting

CANON XA10 Camcorder

UHM Media Lab Study Guide 8/17/2011

CANON XA10 Camcorder

Director's Phone: 956-3358

FRONT DESK: 956-3355

Page 6