ページを印刷する
Frame Assembly
1. Unwrap the frame pieces. Assemble frame pieces on provided
foam sheet. This will help keep the frame clean and protect it
from scratches.
NOTE: The frame pieces are labeled "top" and "bottom". Be
sure the frame pieces are assembled according to the labels.
This will ensure the attachment pattern on the frame and
screen surface will match.
#8 Studs
Material Handling Guidelines
CAUTION: Handle screen surface with care. Ambient light rejecting screen surfaces are delicate and should remain flat at all
times.
•
Carefully and evenly unroll screen surface to ensure flatness.
•
Do not fold, stretch or crease screen surface.
Cleaning
Parallax screen surface can be cleaned as follows:
Using a white clean cloth (100% cotton preferred) that is dampened with clean water, gently wipe the area in a horizontal direction. Do
not wipe in a vertical direction or with a circular motion. Using a dry 100% cotton cloth, wipe screen surface dry in horizontal direction
after each cleaning. Windex Original spray cleaner can be used on tough to clean areas.
2. Slide the frame pieces together at corners.
NOTE: The frame assembly holes may not appear to fit
properly at the corners until all fasteners have been attached.
Once fasteners are attached, the frame corners will be drawn
in for a proper fit.
3. Secure frame pieces with black flat head screws provided. Do
not tighten screws until all are started. See Figure 1.
4. Attach the eight #8 studs to the back of the frame in the
predrilled holes.
Black Flat Head Screws
Figure 1 (Rear View)
•
Do not allow objects to rest on screen surface.
•
Do not puncture screen surface.
3