- ページ 12

計測機器 ASTLES SENSOLUTION C800のPDF インストールと操作をオンラインで閲覧またはダウンロードできます。ASTLES SENSOLUTION C800 20 ページ。

C800 Analyser Operating Manual

8.2. Temperature Calibration

By default ATC mode is enabled.

Temperature calibration is only possible when an ATC probe is fitted. The ATC calibration offset is

limited to ±10 °C.

902857-A - C800 Analyser Operating Manual.docx

Press

again to confirm the slope and the

offset. The analyser will then ask if you would

like to reset the runtime, select NO for this.

The sensor is now calibrated.

To calibrate the temperature, navigate to ATC

in the main menu.

ATC must be enabled.

Place the sensor into a solution of stable

temperature. Adjust the offset, with the

arrows, so that the temperature reads the

correct value and press

The analyser is now calibrated for automatic

temperature readings.

to confirm.