ページを印刷する
Operation and display
pedal assistence
level
Start
Make sure the switch on the battery is set to 1.
Press and hold the "display on/off" button for two seconds. The pedal assistance is now
at level 1. Your ride can begin!
Ride
There are nine levels of pedal assistance. Use the plus and minus buttons to choose a
level. The higher the level, the sooner the battery will run out!
In the display, the level is displayed at the bottom left, next to the word PAS.
If you drive in the dark, switch on the front lamp with the light button on 'I' small light or
'II' high light. To turn on the taillight, press and hold the plus button (or "more pedal
assistance") for a moment. You will see the lighting icon on the display.
By gently squeezing the brake while cycling, you can temporarily turn off the engine.
Page 4
display on / off
trip info / USB-
port / settings