Astonic Breeze 사용자 설명서 - 페이지 5

{카테고리_이름} Astonic Breeze에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Astonic Breeze 10 페이지.

Operation and display

pedal assistence

level

Start

Make sure the switch on the battery is set to 1.

Press and hold the "display on/off" button for two seconds. The pedal assistance is now

at level 1. Your ride can begin!

Ride

There are nine levels of pedal assistance. Use the plus and minus buttons to choose a

level. The higher the level, the sooner the battery will run out!

In the display, the level is displayed at the bottom left, next to the word PAS.

If you drive in the dark, switch on the front lamp with the light button on 'I' small light or

'II' high light. To turn on the taillight, press and hold the plus button (or "more pedal

assistance") for a moment. You will see the lighting icon on the display.

By gently squeezing the brake while cycling, you can temporarily turn off the engine.

Page 4

display on / off

trip info / USB-

port / settings