ページを印刷するSTEP 3
-Hoist the header assembly to the top of the posts and insert the post top brackets into the top of each post (see Fig. 3-1).
-Secure the header assembly to each post using (4) #12 x 1 1/4" HWH #5 Tek screws per bracket (see Fig. 3-2).
NOTE: This applies to both post top bracket types.
Header Assembly
Fig. 3-1
STEP 4 - OPTIONAL COLUMN KITS: SIDE PLATES
-If your pergola has side plates, center two per post in front of the post along the header (see Fig. 4-1).
-Attach the inside face of the side plate to the post using #12 x 1 1/4" HWH #5 Tek screws through the pre-drilled holes.
-Also attach the side plate to the header at the top using (4) #12 x 1 1/4" HWH #5 Tek screws (see Fig. 4-2).
-Insert a hole plug into all exposed holes.
-Repeat for each side plate.
Header Assembly
Side Plate
3" Sq. Post
Fig. 4-1
3" Sq. Post
#12 x 1 1/4" HWH
#5 Tek Screw
3" Sq. Post
Fig. 3-2
Hole Plug
#12 x 1 1/4" HWH
#5 Tek Screw
Side Plate
Header
Assembly
Fig. 4-2
Header Assembly