テント AMERICANA PERGOLAのPDF 組立説明書をオンラインで閲覧またはダウンロードできます。AMERICANA PERGOLA 11 ページ。

Before You Begin:

Recommended Tools:

Note on Masonry Units:

Note on Electric Drills:

Note on Cutting and Drilling:

If you have any questions during installation, please call us at 1-800-851-0865

1) Please read all instructions and notes carefully. Check the Parts List or Bill of Materials for

any missing parts and gather necessary tools. To prevent scratching of painted materials,

place on a tarp, paper, or other protective material.

2) You may be required to obtain a building permit for this structure from your local building

authority. Contact your local building department for details.

3) Note that this shade structure is not designed to carry additional loads such as hanging

heavy plants, swings, people, or other objects.

Saftey Glasses, Tape Measure, Carpenters Level, Framing Square, Hex Head Nut Drivers,

Chalk Line, Electric Drill w/ Bits, Pliers, Metal Hack Saw, Silicone Caulking,

Regular and Phillips Screw Drivers

If securing to stone, concrete, or other masonry unit, a masonry drill and bits may be required.

You may also be required to purchase masonry anchor bolts, as the 1-1/2" lag screws

provided will not be sufficient.

We recommend lowering the speed of your drill during this installation. Installing Tek screws

at a high rpm may cause the Tek screws to become damaged or break during installation.

Cutting and drilling will cause metal shavings. These shavings must be carefully removed by

sweeping or brushing. If this is not done, the metal shavings will quickly rust and stain the

surface finish.

ATTACHED

SINGLE HEADER PERGOLA

ASSEMBLY INSTRUCTIONS

Rev. - 5/04/10