- ページ 8
産業機器 Donovan Quick-Flip III 1808912のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Donovan Quick-Flip III 1808912 20 ページ。 Electric conversion
ページを印刷するSpring Pivot Installation - Tandem Axle Hydraulic Housing Assembly - continued
STEP 2B: Fabricate supports to be equal in width, with an overall
width of 107 1/2". Secure supports to truck frame.
spring pivot support
107 1/2"
NOTE: Spring pivot supports must be equal in length so
system will be centered on truck
STEP 3: Remove covers from spring assemblies.
5
spring assembly
equal
width
equal
width
cover
spring
assembly
STEP 4: Compare springs to springs illustrated below to find
driver side assembly.
DRIVER SIDE
STEP 5: Clamp driver side spring assembly to spring pivot
support tube at location determined previously. Weld
directly to tube or drill 3/8" holes and fasten to tube
with screws
, washers
H
passenger side. Rotate spring shafts so spring catch
engages spring hook as shown, then reinstall covers.
spring pivot
support tube
H
drill
3/8"
holes
Y
P/N 1808922 Rev. C
PASSENGER SIDE
and nuts
. Repeat for
Q
Y
spring catch
driver side
H
spring assembly
Q
spring
shaft