Donovan Quick-Flip III 1808912 Instrukcja obsługi - Strona 8

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Urządzenia przemysłowe Donovan Quick-Flip III 1808912. Donovan Quick-Flip III 1808912 20 stron. Electric conversion

Drukuj stronę

Spring Pivot Installation - Tandem Axle Hydraulic Housing Assembly - continued

STEP 2B: Fabricate supports to be equal in width, with an overall

width of 107 1/2". Secure supports to truck frame.

spring pivot support

107 1/2"

NOTE: Spring pivot supports must be equal in length so

system will be centered on truck

STEP 3: Remove covers from spring assemblies.

spring assembly

equal

width

equal

width

cover

spring

assembly

STEP 4: Compare springs to springs illustrated below to find

driver side assembly.

DRIVER SIDE

STEP 5: Clamp driver side spring assembly to spring pivot

support tube at location determined previously. Weld

directly to tube or drill 3/8" holes and fasten to tube

with screws

, washers

passenger side. Rotate spring shafts so spring catch

engages spring hook as shown, then reinstall covers.

spring pivot

support tube

drill

3/8"

holes

P/N 1808922 Rev. C

PASSENGER SIDE

and nuts

. Repeat for

spring catch

driver side

spring assembly

spring

shaft