ページを印刷する
Configure Voice call destinations command [CVC]
The product can be configured to dial a number stored in the telephone's memory. When the
user presses the call button the telephone produces dial tone mimic and confidence
tones whilst
it
Autodial number can be configured by the USER and changed as required. To re-
program the number the following command is used:
CVC1234.+44123456789
To store additional number (when telephone equipped with more than one "press to call"
button) use:
CVC1234.+44123456789.+441234567890.+441234567890
It is important that the prefix [country code] '+44' is used. Also ensure correct PIN is
entered CVC1234.(1st autodial number).(2nd autodial number).(3rd autodial number)
The originator [the person who sent the SMS command] and the USER LIST will receive the
following message indicating that a parameter has been modified:
Location: {location of telephone} this can be configured via SMS
Type:
New VOICE No's set
Battery: [Battery_voltage] current battery voltage e.g. 11.95V accurate to approx. 37mV
Signal: [GSM Signal_level] Range is 0-31 (0 unregistered, 31 max strength)
Last Call: [Duration of last call if over 10 seconds]
Ver: <Firmware _Version> Factory preset.
Configure Location command [CLO]
Each telephone can be programmed with its own unique location reference, this can be
configured remotely is limited to 30 characters and must not contain the symbols ',' [comma]or
'.' [full stop]. The following command sets the location to DAC Limited BB9 7DR:
CLO1234.DAC Limited BB7 9ED
The originator [the person who sent the SMS command] and the USER LIST will receive the
following message indicating that a parameter has been modified:
Location: {location of telephone} this can be configured via SMS
Type:
New Location set
Battery: [Battery_voltage] current battery voltage e.g. 11.95V accurate to approx. 37mV
Signal: [GSM Signal_level] Range is 0-31 (0 unregistered, 31 max strength)
Last Call: [Duration of last call if over 10 seconds]
Ver: <Firmware _Version> Factory preset.
connects
to
the
pre-programmed
internal
memory
number.