DAC RA711-GSM Kullanıcı Kılavuzu - Sayfa 8

Telefon DAC RA711-GSM için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DAC RA711-GSM 12 sayfaları.

Configure Voice call destinations command [CVC]

The product can be configured to dial a number stored in the telephone's memory. When the

user presses the call button the telephone produces dial tone mimic and confidence

tones whilst

Autodial number can be configured by the USER and changed as required. To re-

program the number the following command is used:

CVC1234.+44123456789

To store additional number (when telephone equipped with more than one "press to call"

button) use:

CVC1234.+44123456789.+441234567890.+441234567890

It is important that the prefix [country code] '+44' is used. Also ensure correct PIN is

entered CVC1234.(1st autodial number).(2nd autodial number).(3rd autodial number)

The originator [the person who sent the SMS command] and the USER LIST will receive the

following message indicating that a parameter has been modified:

Location: {location of telephone} this can be configured via SMS

Type:

New VOICE No's set

Battery: [Battery_voltage] current battery voltage e.g. 11.95V accurate to approx. 37mV

Signal: [GSM Signal_level] Range is 0-31 (0 unregistered, 31 max strength)

Last Call: [Duration of last call if over 10 seconds]

Ver: <Firmware _Version> Factory preset.

Configure Location command [CLO]

Each telephone can be programmed with its own unique location reference, this can be

configured remotely is limited to 30 characters and must not contain the symbols ',' [comma]or

'.' [full stop]. The following command sets the location to DAC Limited BB9 7DR:

CLO1234.DAC Limited BB7 9ED

The originator [the person who sent the SMS command] and the USER LIST will receive the

following message indicating that a parameter has been modified:

Location: {location of telephone} this can be configured via SMS

Type:

New Location set

Battery: [Battery_voltage] current battery voltage e.g. 11.95V accurate to approx. 37mV

Signal: [GSM Signal_level] Range is 0-31 (0 unregistered, 31 max strength)

Last Call: [Duration of last call if over 10 seconds]

Ver: <Firmware _Version> Factory preset.

connects

the

pre-programmed

internal

memory

number.