- ページ 26

オール・イン・ワン・プリンター Canon PIXMA MX700 SeriesのPDF ネットワーク設定マニュアルをオンラインで閲覧またはダウンロードできます。Canon PIXMA MX700 Series 32 ページ。 Office all-in-one printer
Canon PIXMA MX700 Series にも：クリーニング・マニュアル (7 ページ), 補足マニュアル (6 ページ), セットアップ方法 (2 ページ), パンフレット＆スペック (2 ページ), 技術情報 (2 ページ), サービスマニュアル (44 ページ)

Select Canon IJ Network in the pop-up

menu, select your machine's name in the list

of printers, then click Add.

Note

The alphanumeric string after the machine's name

is its MAC address.

If the machine has not been detected, make sure of

the following.

– The machine is turned on and connected to the

network device with the LAN cable.

– The machine is not set to use access control.

– The firewall function of any security software is

turned off.

Confirm that your machine's name is added

to the list of printers.

On the Canon IJ Network Scanner Selector

screen, confirm that Canon XXX Network

(where "XXX" is your machine's name) is

selected in TWAIN Data Source Name and a

check mark is displayed on the MAC address

of the machine in Network Device List, then

click Exit to close the dialog box.

If a check mark is not displayed, select the MAC

address of the machine in Network Device List,

then click Apply to use the machine as a scanner.

Note

To confirm the machine's MAC address, display the

machine's network setting information referring to

"Displaying and Initializing Network Settings" in the

User's Guide on-screen manual.

For details on how to scan, refer to the User's

Guide and Scanning Guide on-screen manuals.

After the MP Drivers are installed, start the

Canon IJ Network Tool to mount the Card Slot.

For details on the network setup of the Card Slot,

refer to "Using the Card Slot over a Network" in the

User's Guide on-screen manual.