- ページ 29

オール・イン・ワン・プリンター Canon PIXMA MX700 SeriesのPDF ネットワーク設定マニュアルをオンラインで閲覧またはダウンロードできます。Canon PIXMA MX700 Series 32 ページ。 Office all-in-one printer
Canon PIXMA MX700 Series にも：クリーニング・マニュアル (7 ページ), 補足マニュアル (6 ページ), セットアップ方法 (2 ページ), パンフレット＆スペック (2 ページ), 技術情報 (2 ページ), サービスマニュアル (44 ページ)

The following screen is displayed during setup

Problem

The Set Printer IP Address dialog box

is displayed during setup

Possible Cause and Measures

The following dialog box is displayed if no printer was detected on the network.

Specify the IP address of the machine and click Connect to retry the detection

of the machine.

The IP address currently set for the machine is displayed on the dialog box.

(1)Get IP address automatically

Select to use an IP address provided by a DHCP server. This requires that

the DHCP function is enabled on the router.

(2)Use next IP address

Select to manually specify an IP address, for example if there is no DHCP

server functionality in the network environment in which you are using the

machine.

IP Address/Subnet Mask/Default Gateway

Enter each value to specify a fixed IP address when Use next IP Address is

selected.

(3)Network Information

Click to display the Network Information dialog box, and confirm network

settings when your machine cannot be detected automatically during setup

for use over the network.

(4)Connect

Click to search for the machine with the specified settings. If the machine is

still not detected with a specified IP address, see "Cannot connect to the

machine (the machine is not detected)" on page 28.

(1)

(2)

(3)

(4)