Canon PIXMA MX700 Series Network Setup Manual - Page 29
Browse online or download pdf Network Setup Manual for All in One Printer Canon PIXMA MX700 Series. Canon PIXMA MX700 Series 32 pages. Office all-in-one printer
Also for Canon PIXMA MX700 Series: Cleaning Manual (7 pages), Supplementary Manual (6 pages), Setup Instructions (2 pages), Brochure & Specs (2 pages), Technical Information (2 pages), Service Manual (44 pages)
Print Page
The following screen is displayed during setup
Problem
The Set Printer IP Address dialog box
is displayed during setup
Possible Cause and Measures
The following dialog box is displayed if no printer was detected on the network.
Specify the IP address of the machine and click Connect to retry the detection
of the machine.
The IP address currently set for the machine is displayed on the dialog box.
(1)Get IP address automatically
Select to use an IP address provided by a DHCP server. This requires that
the DHCP function is enabled on the router.
(2)Use next IP address
Select to manually specify an IP address, for example if there is no DHCP
server functionality in the network environment in which you are using the
machine.
IP Address/Subnet Mask/Default Gateway
Enter each value to specify a fixed IP address when Use next IP Address is
selected.
(3)Network Information
Click to display the Network Information dialog box, and confirm network
settings when your machine cannot be detected automatically during setup
for use over the network.
(4)Connect
Click to search for the machine with the specified settings. If the machine is
still not detected with a specified IP address, see "Cannot connect to the
machine (the machine is not detected)" on page 28.
(1)
(2)
(3)
(4)
29