- ページ 7

オール・イン・ワン・プリンター Canon PIXMA PRO-100 SeriesのPDF セットアップマニュアルをオンラインで閲覧またはダウンロードできます。Canon PIXMA PRO-100 Series 8 ページ。 Non-pc device printing
Canon PIXMA PRO-100 Series にも： スタートマニュアル (4 ページ), パンフレット＆スペック (12 ページ), クイックマニュアル (22 ページ), マニュアル (2 ページ), セットアップ (2 ページ), はじめに (4 ページ)

ページを印刷する
Canon PIXMA PRO-100 Series セットアップマニュアル

Troubleshooting

WPS
When the (blue) Wi-Fi lamp fl ashes slowly and the (orange) Alarm lamp is lit:
•
Press the button on only one access point.
•
Check the security settings of the access point.
After checking the above points, wait for a while and confi gure wireless connection setting again.
For details on how to check the security settings of the access point, refer to the manual supplied with the access
point or contact its manufacturer.
When the (blue) Wi-Fi lamp fl ashes quickly and the (orange) Alarm lamp is lit:
•
Is the network device (router, etc.) turned on? If the network device is already turned on, turn it off, then turn it back
on.
•
Are the computer and network device confi gured?
•
Are the access point and printer installed in an open space where wireless communications are possible?
•
Is the access point operating in IEEE802.11n (2.4 GHz), IEEE802.11g or IEEE802.11b?
Wait for a while, then bring the access point and printer close to each other, and confi gure wireless connection
settings again within a specifi ed time.
For details on how to check the settings of the access point, refer to the manual supplied with the access point or
contact its manufacturer.
To confi gure wireless connection settings again
To confi gure wireless connection settings again, press the RESUME/CANCEL button (A).