- ページ 6

バーコードリーダー Cognex DataMan 8600 SeriesのPDF リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Cognex DataMan 8600 Series 14 ページ。 Handheld verifier
Cognex DataMan 8600 Series にも：クイック・リファレンス・マニュアル (8 ページ)

ページを印刷する

Data Matrix Symbol Quality Verification

Cognex DataMan 8600 handheld verifiers ensure that a Data Matrix symbol meets the AIM DPM (Direct Part Mark) /

ISO/IEC TR 29158 Quality Guideline.

The DataMan 8600 handheld verifiers provide:

Contract Compliance: The DataMan 8600 software, integrated lighting, and fixed optics meet the AIM-DPM /

ISO/IEC TR 29158 Quality Guideline.

System Calibration: The DataMan 8600 verifier includes a certified calibration card necessary to calibrate the

reader.

Upgrading a Device for Verification

If you are upgrading a previously purchased DataMan 8600 reader to be used as a verifier, your reader must be using

firmware version 5.4.4 or newer. To update the firmware:

1. Connect your reader to the DataMan Setup Tool.

2. Choose System > Update Firmware.

3. Select the file DM8600_v.5.4.4.bin.gz or newer from the directory where the firmware update automatically

navigates (Cognex\DataMan\Firmware\DM8000 Series).

To enable the DPM Verification feature, you must upload a feature key file to the reader:

1. Connect the reader to the DataMan Setup Tool.

2. Choose System > Upload Feature Key.

3. Select the feature key file that you received from Cognex.

4. The reader automatically reboots after the upgrade and it is ready to use for verification.

Data Matrix Symbol Quality Verification