- ページ 4
バーコードリーダー Cognex DataMan 8600 SeriesのPDF クイック・リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Cognex DataMan 8600 Series 8 ページ。 Handheld verifier
Cognex DataMan 8600 Series にも： リファレンス・マニュアル (14 ページ)
ページを印刷する
Getting Started: Stand-off Distances
The stand-off is an accessory that consists of a plastic frame that is attachable
to the device (see below) and various spacers. By threading in the right spac-
ers, different fixed mechanical reading distances can be set.
With a combination of 5mm, 7mm, and 10mm spacers, the following reading
distances can be set:
• 8,3 mm
(without spacer – 30° illumination)
• 13,3 mm
• 15,3 mm
(45° illumination - same distance as
DM7500 Verifier stand-off)
• 18,3 mm
NOTE: If 5mm spacers are used in combination with other spacers, the 5mm spacers
must be placed on top due to their shorter internal thread.
NOTE: 8.3 mm distance is required for AIM-DPM verification.
3
• 20,3 mm
• 23,3 mm
•
25,3 mm
(60° illumination)
•
30,3 mm
Getting Started: Stand-off Installation
Attach the stand-off carefully to your DataMan 8600 reader.
1.
This way up
2.
The stand-off
snap-fits into the
reader.
4