- ページ 9

バーコードリーダー Cognex DataMan 8700のPDF クイック・リファレンス・マニュアルをオンラインで閲覧またはダウンロードできます。Cognex DataMan 8700 16 ページ。

Installation

Installation procedures are detailed in the DataManDM8700 Reference Manual,

which is installed with the DataMan Setup Tool. From the Windows Start menu,

select the following to access the manual: All Programs > Cognex > DataMan

Software v> Documentation.

Note:

Cables are sold separately.

If a standard component is missing or damaged, immediately contact

your Cognex Authorized Service Provider (ASP) or Cognex

Technical Support.

CAUTION:

All cable connectors are "keyed" to fit the connectors on the

DataMan system; do not force the connectors or damage may occur.

Install Software, Documentation and

Connect the Reader

To configure a DataMan 8700 reader, the DataMan Setup Tool software must be

installed on a PC on the network. The DataMan Setup Tool is available from the

DataMan support site: cognex.com/support/dataman.

1. After installing the software, connect the DataMan 8700 to your PC.

2. Launch the DataMan Setup Tool and click Refresh.

3. Select your DataMan 8700 reader from the list and click Connect.