Cognex DataMan 8700 빠른 참조 매뉴얼 - 페이지 9

{카테고리_이름} Cognex DataMan 8700에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cognex DataMan 8700 16 페이지.

Installation

Installation procedures are detailed in the DataManDM8700 Reference Manual,

which is installed with the DataMan Setup Tool. From the Windows Start menu,

select the following to access the manual: All Programs > Cognex > DataMan

Software v> Documentation.

Note:

Cables are sold separately.

If a standard component is missing or damaged, immediately contact

your Cognex Authorized Service Provider (ASP) or Cognex

Technical Support.

CAUTION:

All cable connectors are "keyed" to fit the connectors on the

DataMan system; do not force the connectors or damage may occur.

Install Software, Documentation and

Connect the Reader

To configure a DataMan 8700 reader, the DataMan Setup Tool software must be

installed on a PC on the network. The DataMan Setup Tool is available from the

DataMan support site: cognex.com/support/dataman.

1. After installing the software, connect the DataMan 8700 to your PC.

2. Launch the DataMan Setup Tool and click Refresh.

3. Select your DataMan 8700 reader from the list and click Connect.