- ページ 11
アクセサリー Cogvis fearlessのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Cogvis fearless 12 ページ。
ページを印刷するStep 4: Alignment and Calibration
Calibration is automatic. To display the calibration view, click on the right arrow
in the „Initialization started" image view. The floor is displayed as a blue area. If
problems occur, check the position of the sensor, realign it if necessary and click
on „Restart" on the platform. Now check the image according to step 4.
Calibration visualization
Change of the sensor image on the platform,
if necessary, under „Initialization started"
(see page 6)
Step 5: Operation
If the setup and calibration were
successful, the position of the sensor
should NOT be changed any more.
If a change of position is necessary,
realign the sensor, then click on
„Restart" on the platform and check
the calibration/image view according
to step 4.
fearless
Installation guide
Page 11 of 12