- ページ 12

アクセサリー Cogvis fearlessのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Cogvis fearless 12 ページ。

6. Connection to existing call systems

This step becomes interesting for you if you want to connect to an existing alarm or

emergency call sys-tem. The integration into the call system is very uncomplicated:

fearless works with a radio-based solution from ELDAT, the transmitter is already

directly integrated into the fearless system. The RCL07 module is required as

receiver (http://eldat-en.fearless-system.com). If you already have some in use,

fearless can be connected directly to them. If you require appropriate modules incl.

connection cable, you are welcome to order them from us.

To connect the system to the existing call system, please consider the following

brief instructions:

1.) Trigger a test alarm on the fearless platform. To facilitate pairing, several test

alarms are now sent within 30 seconds.

2.) Briefly (< 1.6 seconds) press the programming button R. The receiver is now

ready to learn, the LED of the corresponding channel flashes.

3.) As soon as the pairing is successful and the system is ready for use, the LED

lights up briefly.

4.) If you want to test the functionality, you can trigger further test alarms at any

time.

We wish you much joy with fearless!

cogvis software und consulting GmbH

Wiedner Hauptstraße 17/1/3a

1040 Vienna

Austria

T +43 1 236 058 013

cogvis.at

fearless

Installation guide

Page 12 of 12