Cogvis fearless 설치 매뉴얼 - 페이지 12
{카테고리_이름} Cogvis fearless에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cogvis fearless 12 페이지.
페이지 인쇄6. Connection to existing call systems
This step becomes interesting for you if you want to connect to an existing alarm or
emergency call sys-tem. The integration into the call system is very uncomplicated:
fearless works with a radio-based solution from ELDAT, the transmitter is already
directly integrated into the fearless system. The RCL07 module is required as
receiver (http://eldat-en.fearless-system.com). If you already have some in use,
fearless can be connected directly to them. If you require appropriate modules incl.
connection cable, you are welcome to order them from us.
To connect the system to the existing call system, please consider the following
brief instructions:
1.) Trigger a test alarm on the fearless platform. To facilitate pairing, several test
alarms are now sent within 30 seconds.
2.) Briefly (< 1.6 seconds) press the programming button R. The receiver is now
ready to learn, the LED of the corresponding channel flashes.
3.) As soon as the pairing is successful and the system is ready for use, the LED
lights up briefly.
4.) If you want to test the functionality, you can trigger further test alarms at any
time.
We wish you much joy with fearless!
cogvis software und consulting GmbH
Wiedner Hauptstraße 17/1/3a
1040 Vienna
Austria
T +43 1 236 058 013
cogvis.at
fearless
Installation guide
Page 12 of 12