- ページ 3

ゲートウェイ DOREMIDI MIDI Network Box ProのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DOREMIDI MIDI Network Box Pro 7 ページ。

4. Steps for usage

1. Power supply: Use a 5~9VDC adapter to supply power to the product through the "DC IN"

interface.

2. Connect MIDI devices: Use a 5-pin MIDI cable to connect the MIDI IN of the MIDI device to the

MIDI OUT of the MR-1 Pro, and connect the MIDI OUT of the MIDI device to the MIDI IN of the

MR-1 Pro.

3. Connect to the local area network: Use the RJ45 network cable to connect the "MIDI LAN"

interface of the UR-1 Pro to a network router or network switch.

4. Listener Mode: Long press the mode button for 3 seconds, when the indicator light is blue, it

indicates the listener mode. The MR-1 Pro can be discovered and connected through a

computer or other terminal. The indicator light flashes when it is not connected, and the

indicator light is always on after the connection is successful. refer to "DOREMiDi Network MIDI

Configuration Manual.pdf" at

5. Initiator Mode: Long press the mode button for 3 seconds, when the indicator light is red, it

means the initiator mode. In initiator mode, MR-1 Pro will automatically search for DOREMiDi's

RTP-MIDI devices in the local area network and actively connect. The indicator light flashes

when not connected, and the indicator light is always on when the connection is successful.

(Note: When an RTP-MIDI device (such as a computer) in the local area network sends a SysEx message to the

MR-1 Pro device, the maximum data size of each packet must not exceed 10K bytes.)

5. Configure the IP address

MR-1 Pro/UR-1 Pro obtains IP address automatically by default, which allows a router with

DHCP function to automatically assign an IP address. Users can send SysEx messages through the

RTP-MIDI network to configure MR-1 Pro/UR-1 Pro as a static IP address, the configuration steps

are as follows:

Environmental requirements: Windows 7 or newer version of Windows system, the computer and

the product to be upgraded need to be connected to the same local area network. For example, on

a Mac system, you can use software that can send SysEx messages, such as "SysEx Librarian".

1. Step 1: Refer to "DOREMiDi Network MIDI Configuration Manual.pdf" to connect the RTP MIDI

device of DOREMiDi to the LAN.

Step 2: Use MIDI-OX software to configure MIDI Output and MIDI Input. Mac system can use

SysEx Librarian software.