- ページ 4

ゲートウェイ DOREMIDI MIDI Network Box ProのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DOREMIDI MIDI Network Box Pro 7 ページ。

3. Step 3: Use to open "SysEx..." → enter the IP setting command → click "Send/Receive Syses"

to send the setting command

 Set the IP SysEx format: the data header and tail are fixed, and the data area is the IP address.

For example, set the IP address to "192.168.1.112", as shown in the figure:

F0 00 21 5E 0E 40 01 09 02 01 06 08 00 00 01 01 01 02 F7

Data Header

 After the setting is successful, software will receive a feedback message, as shown in the figure.

Then power on the product again, and the product will use a static IP.

Note:

 In a network of multiple RTP MIDI devices, it is necessary to ensure that the IP addresses of

the devices cannot be duplicated, and the network segments of the IP addresses must be the

same. for example:

IP-1 : 192 : 168 : 001 : 112

IP-2 : 192 : 168 : 001 : 113

The two IP addresses are different, but the network segment 192: 168: 001 must be the same.

192.168.001.112

Data Tail