- ページ 7

レシーバー Bolin Technology VCC-BR-M-11132017のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Bolin Technology VCC-BR-M-11132017 14 ページ。 Hdbaset receiver

HDBaseT Adapter

1. LAN Port(RJ45)

Connect network switch or router to this port for Ethernet. (Not an IP encoder)

2. IR Remote Controller Indicator

These are sensors to receive commands from infrared remote controller, distance up to 10 meters.

3. RS-422 Control Port

Use RJ45 to RS-422 extension adapter cable to remotely control PTZ camera.

page 10)

4. RS232 Control Port

Use RJ45 to RS-232 extension adapter cable to remotely control PTZ camera

page 10)

5. 12V DC Power Port

Connect include 12V DC power adaptor and cord.

6. Power LED Indicator

Turns red when the device is connected to power outlet.

7. Heat-sink surface panel

All aluminum body for quick heat dissipation.

8. HDMI Upholder

To fixed male HDMI port in stabilization.

9. 3.5mm IR IN

Connect to an IR receiver, The IR signal received from this port can send out via HDBaseT receiver.

10. v1.4b HDMI Video Output

Connect to HDMI source display.

11. RJ45 Port for HDBaseT Input(802.3at PoE+)

Support One-Cable transmission of camera power (POE+), 4K video and control signal. Connects to the

HDBaseT camera via CAT5e/CAT6 cable. (Transmission distances of up to 100M/328ft)

12. 3.5mm jack Audio Out

13. HDBaseT Port signal Link indicator

The LED lit GREEN when the camera is powered on.

14. HDBaseT Port signal Link indicator

The LED flashed ORANGE when the camera transmits data with HDBaseT.

(Extension cable detail view on