- ページ 9
レシーバー Bolin Technology VCC-BR-M-11132017のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Bolin Technology VCC-BR-M-11132017 14 ページ。 Hdbaset receiver
ページを印刷する
Camera Control Methods and System Configurations
This unit has multiple ways of controlling the camera and various system configuration capabilities using optional
products. This section describes ways of controlling and typical system examples with the required components and usage
of each system.
1. Use the Infrared Remote Controller
2. Use HDBaseT Receiver to control.
Control the camera with using HDBaseT Receiver
Use the Infrared Remote Controller
To operate the camera from a short distance. For IR remote control details, refer to Operation Using the Infrared Remote
Controller.
System Configuration Diagram
Control the camera using HDBaseT Receiver
1.
Set RS232 control method on Bottom Dip Switch.
2.
Set Baud Rate on Bottom Dip Switch to the same as Baud Rate setting on the keyboard you are using.
3.
Reboot the camera by turning it Off/On after the Bottom Dip Switch has been set up correctly.
4.
Device supports RS232 and RS422/485 control.
5.
RJ45 to RS232 on HDBaseT receiver does not support daisy chain control.
6. Use Cat 6 network cable to connect the camera to HDBaseT Receiver.
7.
Control connection in between HDBaseT Receiver and keyboard refer to the camera control connection.
9