- ページ 8

計測機器 Akytec ITP15のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Akytec ITP15 10 ページ。 Led bargraph indicator

Fig. 6.3 Alarm limits adjustment

To set LL to 0% and HL to 100%, set the first and the last segments to "fast flashing red"

using the buttons

and

, then press

to save and quit (Fig. 6.4 a, b).

If you need only one limit (lower or upper), press and hold the button

for 3 seconds, set

the first or the last segment to "slow flashing green" using the button

, and press

to save and quit (Fig. 6.4 b, c).

Fig. 6.4 Setting the alarm at the limit values

7. Operation

When the input signal is connected and the supply voltage is turned on, the display shows

the process value as shown in Fig. 7.1.

akYtec GmbH · Vahrenwalder Str. 269 A · 30179 Hannover · Germany Tel.: +49 (0) 511 16 59 672-0 ·