- ページ 7

ボイラー Advance Appliances EG9-UのPDF インストールとユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Advance Appliances EG9-U 12 ページ。 Electric boiler 6, 9 & 12kw

USER INSTRUCTIONS

Set the programmer to match your own preferences for heating periods. The room

thermostat should be set at a comfort level, usually 20°C. The room thermostat should be

in a room where the radiator is locked on e.g. a hallway, study etc rather that a living room

or bedroom. The boiler is automatic and should give a trouble free life.

The green LED means that there is power to the boiler; it doesn't mean that the boiler is

actually heating the system. It does this when there is demand for heating through the

programmer and room thermostat.

If there is insufficient water in the system the red LED will be on continuously. Switch the

room thermostat off and on (making sure that the programmer is on) to start the boiler

up again, air may be present in the system. If the fault persists the system may need

recharging – consult your installer.

The case can be kept clean with a damp cloth.

FAILURE

The LED may flash red, indicating overheat. The unit is protected by the PCB controller in

addition to a thermomechanical device. The appliance will reset itself when it cools. If the

overheat recurs please ensure that the connection from the thermistor (on page 8) to the

PCB is soundly made. Check circulation is free in your heating system. A continuous red

LED relates to a no flow condition and air must be purged from the heating circuit or low

pressure, please charge system. Consult problem solving on page 9 if failure persists.

PROTECTION

In situations where this appliance may be subject to temperatures below 5°C (e.g. holiday

lets not occupied in winter etc) a frost thermostat can be linked to the control circuit. The

unit should always be installed in the main envelope of the property, never outside.

The eGlow can be safely installed in most situations, however, excessive moisture or

temperature extremes should be avoided.

PART NUMBERS

3Kw HEATER PODS

PCB ASSEMBLY

FLOW SWITCH

AUTO AIR VENT

AUTO BY PASS

THERMISTOR

PUMP

CONTACTOR

HIGH LIMIT THERMOSTAT

AA0401

AA0402

AA0403

AA0404

AA0405

AA0406

AA0407

AA0408

AA0409