- ページ 15

自動車アクセサリー DAF PACCAR PACMOBILE 20のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DAF PACCAR PACMOBILE 20 18 ページ。

4.2 Service inspection of the PacMobile 20

The following points must be checked regularly:

•

Internal RCM need to be tested on correct functioning on a regular basis. During the yearly

maintenance visit, a check is advised, to be executed by a certifi ed ABB technician.

•

Cable and connector

 Check for cracks or ruptures on the connector or cable, check whether no internal wires of the

cable are visible.

•

Display screen

 Check for damage and cracks.

•

Powder coating

 Look for damage, cracks or ruptures.

In the following cases the PacMobile 20 must be checked by ABB service personnel before further use:

•

If it was struck by lightning.

•

If it is damaged due to an accident or fi re.

•

If its location has been ﬂ ooded.

Do not power on until the charger has been inspected and approved.

The site operator or helpdesk is the fi rst response to a customer call. The helpdesk can remotely solve

simple problems for the customer.

In special cases the site operator with knowledge of the charger can be asked by ABB Service to report

about the status of some internal components of the charger. Therefore, a brief description of the position

and function of these components is described on the next pages.

A. HMI touch-screen display

B. Bottom cover

C. Fixing screws (2x)

The bottom cover can be opened by removing the

two fi xing screws (C) with a screwdriver.