- ページ 13

景観照明 Dot-Spot clarios-miniのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Dot-Spot clarios-mini 20 ページ。
Dot-Spot clarios-mini にも：取扱説明書 (15 ページ)

Safety precautions / Preparation

Safety precautions

Observe applicable safety regulations for installation. Installation must be performed by

a qualified electrician. The spot runs on 12 V electrical power. To avoid danger, separate

the dot-spot clarios-mini spot from the power supply before any work. The spot can not

be opened. Connect the spot only to a transformer with an output voltage of no more

than 12 V. Incorrect voltage can destroy the spot and the transformer. Connect the

transformer only if the electrical rating specified on the transformer matches your main

power socket rating.

Do not overload the power supply unit! The total output of all consumers attached to the

power supply unit should be approx. 10 % less than the power supply unit's rating.

To protect the connection cable from animal bites it should be equipped with a marten

protection (optional). High ambient temperatures impact the LED's life expectancy. In

order to ensure the LED's long life it is advisable to make sure of adequate heat conduc-

tion. Therefore do not run the spot in ambient temperatures > 50°C.

Tight sealing of the clarios-mini can only be guaranteed if the outer sleeve of the connec-

ting cable is undamaged and the connecting cable is clamped in a water tight manner.

Otherwise, penetrating moisture can reach and destroy the spot's electronics, due to the

capillary effect.

Preparation

Unpack the whole scope of delivery and check the content, which depends on the scope,

for completeness and integrity.

Dispose of any packaging material you no longer require in line with local regulations. If

you notice any transport damage, please contact immediately the dealer from whom you

purchased the spot.

GAW_clarios_mini.indd 13

07.10.2011 12:55:37