Dot-Spot clarios-mini Руководство по эксплуатации - Страница 13
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Ландшафтное освещение Dot-Spot clarios-mini. Dot-Spot clarios-mini 20 страниц.
Также для Dot-Spot clarios-mini: Руководство по эксплуатации (15 страниц)
Safety precautions / Preparation
Safety precautions
Observe applicable safety regulations for installation. Installation must be performed by
a qualified electrician. The spot runs on 12 V electrical power. To avoid danger, separate
the dot-spot clarios-mini spot from the power supply before any work. The spot can not
be opened. Connect the spot only to a transformer with an output voltage of no more
than 12 V. Incorrect voltage can destroy the spot and the transformer. Connect the
transformer only if the electrical rating specified on the transformer matches your main
power socket rating.
Do not overload the power supply unit! The total output of all consumers attached to the
power supply unit should be approx. 10 % less than the power supply unit's rating.
To protect the connection cable from animal bites it should be equipped with a marten
protection (optional). High ambient temperatures impact the LED's life expectancy. In
order to ensure the LED's long life it is advisable to make sure of adequate heat conduc-
tion. Therefore do not run the spot in ambient temperatures > 50°C.
Tight sealing of the clarios-mini can only be guaranteed if the outer sleeve of the connec-
ting cable is undamaged and the connecting cable is clamped in a water tight manner.
Otherwise, penetrating moisture can reach and destroy the spot's electronics, due to the
er
capillary effect.
Preparation
Unpack the whole scope of delivery and check the content, which depends on the scope,
for completeness and integrity.
Dispose of any packaging material you no longer require in line with local regulations. If
you notice any transport damage, please contact immediately the dealer from whom you
purchased the spot.
13
GAW_clarios_mini.indd 13
07.10.2011 12:55:37