ページを印刷する
a.
Plug one end of the VGA/HDMI/DP cable to the monitor's VGA/HDMI/
DP jack.
b.
Connect the other end of the VGA/HDMI/DP cable to your computer's
VGA/HDMI/DP jack.
c.
Tighten the two screws to secure the VGA connector.
•
To connect the audio cable: connect one end of the audio cable to the
monitor's line in port, the other end to the computer's audio-out port.
•
To use the earphone: connect the end with plug type to the monitor's line out
port when an HDMI/DP signal is fed.
•
To use the USB 2.0 ports (C1241QSB only): Take an USB 2.0 cable, and
plug the smaller end (type B) of the USB upstream cable to the monitor's USB
upstream port, and the larger end (type A) to your computer's USB 2.0 port.
Make sure your computer is installed with the lastest Windows 7/Windows 8.1/
Windows 10 operating system. That will enable the USB ports on the monitor
to work.
When these cables are connected, you can choose the desired signal from the
Input Select item in the OSD menu.
2.5
Turning on the monitor
Press the power button
power indicator
2-6
. See page 1-2 for the location of the power button. The
lights up in white to show that the monitor is ON.
Chapter 2: Setup