- ページ 4

調光器 Doug Fleenor Design DMX24DIMのPDF 設置および操作マニュアルをオンラインで閲覧またはダウンロードできます。Doug Fleenor Design DMX24DIM 6 ページ。
Doug Fleenor Design DMX24DIM にも：設置および操作マニュアル (5 ページ)

ページを印刷する

Setting the address switches

The front panel address switches are used to select the DMX512 starting address for

the DMX24DIM. Any starting address from 1 - 512 can be selected. The address

shown on the switches will be the DMX512 address for the first dimmer output. The

next 23 consecutive DMX512 levels will be applied to the remaining dimmer channels.

When the address switches are set to 000, the DMX24DIM operates as if the address

switches were set to 001.

The address switches are also used for a local test function described below.

Local control

Local control mode is used to turn on an output without the use of a DMX512 signal

source. To use local control, set the DMX address switches to 601 to turn on channel

1, 602 for channel 2, etc.

LED indicators

The LED indicators on the front of the DMX24DIM have the following functions:

LED label

Function

SIGNAL

On when DMX is present, flashes when local control is active

MIMIC 1

Tracks the current level of dimmer 1 for troubleshooting purposes

PWR

On when power is on

Page 4 of 6